闭合管路的安全

吉博力Mapress碳钢

经济的选择
吉博力Mapress碳钢是经济实惠的选择。该系统主要用于水加热系统,冷却水系统,自动喷淋灭火系统,消防水管道,压缩空气管道。

塑料保护套或镀锌
吉博力Mapress碳钢管由非合金钢制成,达到非常高的工程标准,并有两种不同表面处理:外层塑料护套或外层镀锌。而用于自动喷淋灭火,非合金钢材质的吉博力Mapress碳钢管可以内外镀锌。

适用各种管径的应用需求
有聚丙烯护套的吉博力Mapress碳铁管的管径范围从12毫米到54毫米,它们特别适用于隐形的表面安装。外部镀锌保护的Mapress碳钢管管径范围则扩大至从12毫米到108毫米。


吉博力Mapress碳钢材质管件有镀锌保护层,还有一层钝化保护层。和其他吉博力Mapress产品一样,挤压标识是正确挤压与否的参照。红色表示产品材质为碳钢,从上面可以看到相关的外径尺寸。碳钢总共有400多种不同型号的管件可以选择。相应的适配器可以快速,简单,安全的把吉博力Mapress碳钢管道连接到其他吉博力系统上。


吉博力Mapress碳钢系统的非合金钢管,可提供带或不带塑料护套。管道外直径范围为12-54毫米,并管材外层加涂了塑料层。


吉博力Mapress碳钢应用用途
闭路供热水系统
闭路冷却水系统
管道用作输送加热油和矿物油,蓝色O形圈氟(FKM 氟橡胶)
压缩空气系统的可达2.5兆帕(25巴) - 相关的认可必须相应遵循。
自动喷水灭火系统(湿式喷水灭火系统),消防水管道(批准必须遵守)

10 good reasons for Geberit Mapress Carbon Steel

1

Simple connection

Permanent pressing for maximum safety

On the deburred pipe, mark the insertion depth and insert into the fitting, place the pressing jaw with the groove on the preset contour, carry out the permanent pressing operation: Faulty pressing is therefore as good as impossible.

2

Faster connection

Pressing instead of welding

The pressing operation is not only straightforward, but also fast – in fact, it's around twice as fast as welding. The connection requires virtually no preparatory work and the pressing sequence itself is fast and simple. Cut to length, debur, attach fitting, press – done.

3

No open flames

No risk of fire

The strength and tightness of the press connection is achieved by cold deformation of the pipe and fitting. In contrast to welding and soldering operations, no open flame or heat is required. Additional protection measures are unnecessary for renovation and repair work.

4

Fast visual check

Reliable recognition of unpressed connections

The pressing indicator on all Geberit Mapress Carbon Steel fittings already indicate unpressed connections before the pressure test. The red colour of the pressing indicator enables clear identification of the product material. The Geberit logo and the dimension are also printed on for confusion-free identification.

5

Protection plug

Protection against dust and dirt

All pressing sockets of Geberit metal fittings are equipped with a protection plug. It protects the supply network from dust and dirt and increases safety through perfect installation. The colour of the protection plug also identifies the application.

6

System pipes

Coating for corrosion protection

The plastic coating of polypropylene (PP) reliably protects carbon steel system pipes in the dimensions 12 – 54 mm against external corrosion. All carbon steel system pipes from 12 to 108 mm are also available in a zinc-plated version for individual solutions for renovations and new constructions, surface-mounted and concealed installations.

7

Mechanical strength for high loads

Wide range of applications

The coordinated components lend the Geberit Mapress system a very high level of strength. Operating pressures of 2.5 MPa (25 bar) and more can be achieved. Due to the high level of mechanical strength, a wide range of applications is possible which extends far beyond the usual domestic heating installations.

8

Spheroidisation of the seal ring

For permanent fixture and a high level of safety

During the pressing sequence, the seal ring is given a pre-defined shape by the pressing jaw of the Geberit Mapress pressing tools. During this process the ring absorbs additional energy for permanent and reliable tightness. Result: The Geberit Mapress pressing system has been working for 40 years.

9

Seal ring

Detecting unpressed fittings during a pressure test

The seal ring provides the pressing indicator with additional safety. Due to its special contours, unpressed connections leak during the pressure test. This prevents any subsequent damage during operation.

10

Homogenous structure

Thermally perfect weld seam execution

Particularly when supporting the seal ring in the inside of the fitting, the clean weld seam is key to the system's permanent tightness and to cutting susceptibility to corrosion. Weld seams have to satisfy the high Geberit quality requirements. For this reason a special thermal treatment ensures a homogeneous material structure and therefore optimum pressing.